* Les fotografies a la nostra web mostren tàndems personalitzats a mida pels nostres clients. El preu que es mostra a dalt és pel nostre model estàndard, incloent-hi components diferents als de les fotografies, geometria adaptada i dos colors RAL per a quadre i logotips.
** Els nostres productes estan en constant desenvolupament, pel que és possible que els models actuals ja presentin diferències i millores respecte als exemples de les fotografies.
** Els nostres productes estan en constant desenvolupament, pel que és possible que els models actuals ja presentin diferències i millores respecte als exemples de les fotografies.
Tàndem per cicloturisme
Des de
5.299€
- Inclou 21% d’IVA, no inclou despeses d’enviament
- Pack de components bàsics + muntatge
- Quadre en qualsevol color RAL opac i logotips a contrast en blanc o negre
- Disseny de geometria “bikefitting”
Les nostres bicicletes tàndem per cicloturisme turisme estan fetes per a aventures de llarga distància sobre dues rodes. Dissenyades per transportar equipatge, mantenir la comoditat durant moltes hores i mantenir-se estables fins i tot quan estan completament carregades, són la companya perfecta per a excursions en bicicleta, vacances en bicicleta i rutes èpiques. Aquest tàndem de turisme presenta un quadre reforçat, una geometria relaxada i un ampli espai lliure per als pneumàtics que ofereix durabilitat, comoditat i confiança en qualsevol terreny.
Components personalitzats
Els nostres tàndems per cicloturisme són molt versàtils pel que fa als components. Podeu escollir entre manillars plans, inclinats o de papallona, transmissions individuals o dobles i pneumàtics adaptats al vostre terreny, des de rutes per carretera fins a camins i pistes de muntanya.
Qaudre boost i pas de roda ample
Amb l’espai Boost opcional, els nostres quadres poden allotjar pneumàtics de MTB més amples per a una major adherència i comoditat en pistes fora de carretera. Això afegeix versatilitat i estabilitat per a terrenys més exigents.
Suports per a bicicletes i equipatge
Necessites portar equipatje? Els nostres quadres inclouen múltiples punts de muntatge per a portaequipatges, portaampolles i bosses de bikepacking. Tant si es tracta d’alforges com de motxilles de quadre, tindràs l’espai que necessites per anar lluny i ben equipat.
Accessibilitat: opció de barra baixa darrera
Per a més comoditat i accessibilitat, tots els nostres models rígids inclouen la possibilitat d’escollir una geometria amb un tub posterior baix i accessible, sense cost addicional. Això ajuda al co-pilot a pujar i baixar fàcilment, sobretot quan la bici està carregada.
Fes “click” per començar el teu propi formulari de personalització
Frame specs
Base components
Custom geometry
Custom paint
Frame specs
| General | |
| – Aluminum frame series 7000 designed and manufactured in Tarragona, welded with TIG – Custom sizing for captain and stoker, with the option for multi-sizing for tandems with multiple riders – Price includes any opaque RAL colour for the frame and black or white contrasting logos – Internal guided wiring for brakes, gearshifter and dropper seatpost – Pre-installed holes for pannier rack mounts | |
| Dropouts | |
| – Frame width – Chainline – Thru-axle – Hanger | 142mm or 148mm (boost) 47.5mm or 52mm (boost) Ø12 x 171.5mm, 1mm SRAM UDH |
| Wheels | |
| – Wheel diameter – Maximum tire width | 29″ 2.1” (50mm) or 2.4″ (boost) |
| Brake calliper mount | |
| – Propietary replaceable system – Rotor diameter | Flat mount or Post mount 203mm |
| Head tube & seatposts | |
| – Headset – Seatpost inner diameter – Seatpost clamp diameter | Integrated “tapered” 1 1/8″ – 1 1/2″ Ø 30.9mm Ø 34.9mm |
| Drivetrain system | |
| – Captain bottom bracket – Timing drivetrain – Gears – Motor cranks – Chain tensioner | BSA 68mm Propietary external system 2x11s, 2x12s, or 1x12s ISIS Anchorage ISCG05 with 3 bolts |
| Others | |
| – Weight – Warranty | Aprox. 15kg 5-year warranty against possible manufacturing defects |
Base components
| List of components for our standard gravel tandem bike: *All our bikes are customised, this is only our standard suggestion, in this list you can find some of the brands we work with, let us know if you are interested in any specific components and we will provide a budget accordingly | ||
| Wheels | BRN | Gravel 29″ |
| Tires | MSC | Gravel 700 x 40C |
| Brakes & shifter group | Shimano | DEORE 4p and 11s |
| Rotors | Brakco | 203mm CL |
| Cassette | SunRace | 11v 11/51 |
| Chains | KMC | 12s |
| Timing chainrings | Miranda | bcd104 4b 34t |
| Mono chainring | FSA | 40t bcd104 4b |
| Cranksets | FSA | Comet |
| Bottom bracket | FSA | Megaexo COMET 68/73mm |
| Captain spider | Campmajó | Simple bcd104 4b threaded |
| Stocker spider | Campmajó | Double bcd104 4b |
| Handlebars | FSA | Comet riser 15mm |
| Stem | FSA | Comet 90mm ±6° |
| Stocker stem | Campmajó | Simple adjust |
| Headset | FSA | ORBIT C-40 |
| Fork | Finna | Carbon Fork |
| Saddles | WAG | Race Short – Black |
| Seatposts | FSA | Comet 30.9x400mm |
Custom geometry
| Option 1: | Custom geometry – Instructions | +€0 |
| Our atesanal manufacturing method allows us to have total flexibility in the design and gives us the possibility to adapt the dimensions of the frame to the captain and stocker dimensions. | ||
| Option 2: | Standard size (S, M, L or combined) | +€0 |
Custom paint
| See our color catalogues here | ||
| Option 1: | Frame in opaque colors and contrasting logos in black or white | +€0 |
| Option 2: | Both frame and contrasting logos in opaque colors | +€30 |
| Option 3: | Frame with colors with special effects and logos in black or white | +€60 |
| Option 4: | Frame with special effects colors and logos in opaque colors | +€90 |
| Option 5: | Contrasting frame and logo colors with special effects | +€100 |
Drivetrain specs and options
1x chainring
BACK
1 – Cassette
- 11/51 – 12s
- HG spline
2 – Rear derailleur
- 12s derailleur
- Mechanical or AXS
- Sram UDH
- T-type ready
3 – Chain
- KMC
- eBike 12s
MIDDLE
4 – Mono chainring
- FSA Megatooth 38t – 42t
- BCD104 / 4b
- Chain line: 47.5mm
5 – Rear timing chainring
- Miranda 34t
- BCD104 / 4b
6 – Stoker crankset
- FSA – COMET 170mm
- Spider: Campmajó double BCD104 / 4b
FRONT
7 – Chain tensioner
- Campmajó ISCG system
- 14t pulley
- Protects chainring
8 – Front timing chainring
- Miranda 34t
- BCD104 / 4b
9 – Captain crankset
- BSA 68mm
- FSA – COMET 170mm
- Spider: Campmajó simple BCD104 / 4b
RECOMMENDED OPTIONS
- RX610
- 11/51 – 12s
- Mechanical
- +€0
- RX820
- 11/51 – 12s
- Mechanical
- +€104
- XPLR AXS
- 11/51 – 12s
- Electronic
- +€289
2x chainring
BACK
1 – Cassette
- 11/42 – 11s or 11/34 – 12s
- HG spline
2 – Rear derailleur
- 11 or 12s
- Mechanical or AXS
- Sram UDH
- T-type ready
3 – Chain
- KMC
- 11 or 12s
MIDDLE
4 – 2x chainrings
- FSA VERO 32/48t
- BCD104 4b
- Chain line: 47.5mm
5 – Rear timing chainring
- FSA VERO 32t
- BCD104 / 4b
6 – Stoker crankset
- BSA 68mm
- FSA – COMET 170mm
- Spider: Campmajó triple gravel BCD104 / 4b
FRONT
7 – Chain tensioner
- Campmajó ISCG system
- 14t pulley
- Protects chainring
8 – Front timing chainring
- FSA VERO 32t
- BCD104 / 4b
9 – Captain crankset
- BSA 68mm
- FSA – COMET 170mm
- Spider: Campmajó simple gravel BCD104 / 4b
RECOMMENDED OPTIONS
- RX 810
- 11/42 – 2x11s
- Mechanical
- +€0
- RX 820
- 11/34 – 2x12s
- Mechanical
- TBC
- AXS
- 10/36 – 2x12s
- Electronic
- TBC
Handlebars options
GRAVEL
- 29″ or 27.5″
- Aluminium
- 24mm inner width
- 28 spokes
- 100x12mm / 12x142mm
- Center Lock
- HG spline
- +€0
Hybrid Gravel HG 1800
- 29″ or 27.5″
- Aluminium
- 25mm inner width
- 28 spokes
- 100x12mm / 12x142mm
- Center Lock
- HG spline
- +€60
M30
- 29″ or 27.5″
- Aluminium
- 30mm inner width
- 32 spokes
- 100x15mm / 12x143mm
- 6b
- HG spline
- +€260
Wheels options
GRAVEL
- 29″ or 27.5″
- Aluminium
- 24mm inner width
- 28 spokes
- 100x12mm / 12x142mm
- Center Lock
- HG spline
- +€0
Hybrid Gravel HG 1800
- 29″ or 27.5″
- Aluminium
- 25mm inner width
- 28 spokes
- 100x12mm / 12x142mm
- Center Lock
- HG spline
- +€60
GR24
- 29″ or 27.5″
- Aluminium
- 24mm inner width
- 28 spokes
- 100x15mm / 12x143mm
- Center Lock
- HG spline
- +€260
M30
- 29″ or 27.5″
- Aluminium
- 30mm inner width
- 32 spokes
- 100x15mm / 12x143mm
- 6b
- HG spline
- +€260
Fork options
RIGID
Carbon fork for gravel & road tandems. Lightweight and strong, reinforced with aluminum in key areas for tandem-ready durability. Front rack compatible and color-matched to the frame for a clean, integrated look.
- +€0
WITH 100mm SUSPENSION
For riding on dirt roads and added comfort, a 100 mm suspension fork can be installed. We use short-travel XC models, more robust than gravel forks and suitable for tandem use.
- JUDY SILVER +€110
- SID SL SELECT CHARGER +€569
Seat posts options
RIGID SEATPOST
COMET – simple and reliable. Our standard option, included in the base price. Lightweight, low-maintenance, and ideal for riders who don’t need on-the-fly height adjustments.
- Ø30.9mm
- +€0
MECHANICAL DROPPER POST
Dropper SHOT – practical and versatile. Adjust saddle height quickly and easily with a cable-actuated system. A solid upgrade for more dynamic riding on changing terrain.
- Ø30.9mm
- +€85 per unit
SUSPENSION SEATPOST
EESILK+ – smooth and comfortable. Designed to absorb bumps and vibrations on rough terrain, its elastomer-based system provides enhanced comfort for a smoother ride.
- Ø30.9mm
- +€220 per unit
Stoker stem options
SIMPLE ADJUSTMENT
Our simplest adjustable stoker stem. Designed for tandems with standard seatposts that will remain in a fixed position over time, with minimal changes to the stoker handlebar or the captain seat.
- Vertical adjustment via clamp on the captain’s seatpost
- Horizontal adjustment through the stem itself
- Seatpost clamp: Ø31.6mm
- Handlebar clamp: Ø31.8mm
- +€0
SIMPLE ADJUSTMENT FRAME CLAMP
This model is the same as the first but features our double-diameter clamp system. The same stem clamp secures the captain’s seatpost, allowing seat position adjustments without affecting the stoker handlebar position. It is also ideal for dropper seatposts.
- Diagonal adjustment
- Campmajó double-diameter seat tube clamp system
- Seat tube clamp: Ø34.9mm (lower) and Ø31.6mm (upper)
- Handlebar clamp: Ø31.8mm
- Includes threaded holes for one bottle cage
- +€48.4
DOUBLE ADJUSTMENT FRAME CLAMP
In this model, an angular adjustment is added to the longitudinal adjustment. This system allows the handlebars to be positioned almost anywhere in space, ensuring maximum comfort and flexibility for the stoker, whether for personal fit or to accommodate different riders.
- Longitudinal and angular adjustment
- Campmajó double-diameter seat tube clamp system
- Seat tube clamp: Ø34.9mm (lower) and Ø31.6mm (upper)
- Handlebar clamp: Ø31.8mm
- Includes threaded holes for two bottle cages
- +€108.9
Frame-only option
Tandem touring frame
- Aluminuim frame including chain tensioner and rear FM or PM brake caliper mount
- “Bikefitting” geometry design
- Any opaque RAL colour for the frame and black or white contrasting logos
From
€1,999
21% VAT included, shipment costs not included
Fill out the form, and we will send you a detailed preliminary quote along with the design of your tandem — completely non-binding!
Featured models:
